Category类型Trade-Mark钢号Equivalent to China Standard很多的国家标准下载Characteristics & application特征参数和作用Equivalent to AWS很多的AWSHard-surfacing硬面堆焊D 667EDZCr-B-15HRc≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.HRc≥48  ，耐腐、耐气蚀、抗阳极腐蚀 。堆焊焦炉料钟、细碎零部件D 802EDCoCr-A-03HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter.HRc38-47  ，耐熱、耐蚀、耐腐 。堆焊较炎热度轴类所要要的零部件如热截取剑刃ECoCr-AD 812EDCoCr-B-03HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve.HRc45-50  ，耐熱、耐蚀、耐腐 。堆焊较炎热度轴类所要要的零部件如燃气轮机阀ECoCr-BD 822HRc≥53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler.HRc≥53  ，耐熱、耐腐  ，但抗挑战试验性好 。堆焊蒸汽bwin·必赢(中国)唯一官方网站旋轉水泵叶轮D 832EDCoCr-C-03HRc≥50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way.HRc≥50  ，耐熱、耐腐 。堆焊较炎热度轴类所要要的零部件如冷轧导轨ECoCr-CD 842EDCoCr-D-03HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die.HRc28-38  ，耐蚀、抗热乏力  ，更具制造疏松性 。堆焊热锻模Cast iron不銹钢材质的Z 308EZNiPure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool.纯镍  ，综合评估耐熱性好 。不銹钢材质的薄件及制造面补焊用  ，如数控磨床导卫ENi-ClZ 408EZNiFeIron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.镍铁  ，比程度高、弹延展性好 。至关重要灰不銹钢材质的及球铁焊补用  ，如汽气缸盖ENiFe-ClZ 508EZNiCu-1Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.镍铜  ，易制造  ，但抗裂性较强 。不承载力的灰不銹钢材质的制造面及砂眼补焊ENiCu-BCopper alloys铜和金Cu 107ECuRed copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.T2裸裸紫铜  ，耐空气  ，海面腐化  ，导电性好 。T2裸裸紫铜电弧电焊用  ，如导电铜排ECuCu 207ECuSiSilicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.硅铜镍钢  ，耐蚀、比程度高 。铜、硅铜镍钢及铜镍钢电弧电焊用ECuSiCu 227ECuSnBTin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.锡磷铜镍钢  ，耐蚀、比程度高 。铜、硅铜镍钢及铜镍钢电弧电焊用ECuSn-CCu 237ECuAlAluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.铝铜镍钢  ，耐腐、耐蚀  ，比程度高 。铜和金电弧电焊或堆焊用ECuAl-A2Aluminum alloys铝和金Al 109TAlPure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.纯铝  ，耐蚀性好  ，但比程度不太高  ，纯铝电弧电焊用E1100Al 209TAlSiSilicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.铝硅  ，抗裂性好  ，互通性大 。铝和金电弧电焊用  ，不容易电弧电焊铝镁和金E4043Al 309TAMnManganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.铝锰  ，比程度高  ，耐蚀 。铝和金电弧电焊用E3003Nickel alloys镍和金Ni 102ENi-1Pure nickel. Welding and surfacing of nickel and nickel to steel.纯镍  ，在镍、镍与钢的电弧电焊与堆焊ENi-1Ni 207ENiCu-7Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.镍铜  ，在镍铜、镍铜与钢的电弧电焊与堆焊ENiCu-7Category类型Trademark钢号Chemical composition核心营养成分(%)Characteristics & application特征参数和作用Equivalent to AWS很多的AWSHardfacing硬面堆焊S 101C3 Cr28 Ni4Si3.5 Fe Rem.HRc48-54. Resistance to wear, gas corrosion and oxidation. Hardfacing of bucket tooth and case pump.HRc48-54  ，耐腐、耐气蚀、抗阳极腐蚀 。堆焊铲斗齿  ，泵套S 111C1 Cr29 W5Co Rem.HRc38-47. Resistance to wear and corrosion at high-temperature. Hardfacing of high temperature and pressure valve.HRc38-47  ，较炎热度下耐腐、耐蚀 。堆焊较炎热度髙压蝶阀ECoCr-AS 112C1.5 Cr29 W8Co Rem.HRc45-50. Resistance to wear and corrosion at high-temperature. Hardfacing of valve and hot-rolling pass.HRc45-50  ，较炎热度下耐腐、耐蚀 。堆焊蝶阀  ，冷轧孔型ECoCr-BS 113C2.5 Cr30 W17Co Rem.HRc≥55. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of screw charging carriage.HRc≥55  ，较炎热度下耐腐、耐熱  ，但抗挑战试验性好 。堆焊锥型上料功能机用S 114C2.5 Cr30 W12Co Rem.HRc≥53. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of three-cone bit.HRc≥53  ，较炎热度下耐腐、耐熱  ，但抗挑战试验较强 。堆焊牙轮碳素钢类钻头ECoCr-CCopperalloys铜和金S 201Sn1 Si0.3Mn0.3Cu Rem.Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper.机械设备制造装备制造耐熱性好  ，抗裂性好 。T2裸裸紫铜气焊及氩弧焊用ERCuS 211Si3 Mn1Cu Rem.Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel.机械设备制造装备制造耐熱性好  ，铜和金氩弧焊及钢的MIG钎焊用ERCuSi-AlS 212Sn5 Cu Rem.Wear resistance. Argon arc welding of copper alloys and surfacing of steel.耐腐性好 。铜和金氩弧焊及钢的堆焊用ERCuSn-AS 213Sn8 Cu Rem.Wear resistance. Argon arc welding of copper alloys and surfacing of steel.耐腐性好 。铜和金氩弧焊及钢的堆焊用ERCuSn-CS 214Al7.5 Cu Rem.Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.耐腐、耐蚀 。铜和金氩弧焊及钢的堆焊用ERCuAl-A1S 215Al9 Cu Rem.Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.耐腐、耐蚀 。铜和金氩弧焊及钢的堆焊用ERCuAl-A2S 221Cu60 Sn1 Si0.3Zn Rem.Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.溶点约890℃ 。铜镍钢气焊及碳弧焊用  ，也可钎焊铜、钢、不銹钢材质的S 221FCu60 Sn1 Si 0.3Zn Rem.S221 welding rod coated with flux.外涂焊剂的S221焊条S 222Cu58Sn0.9Si0.1Fe0.8 Zn Rem.Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.溶点约880℃ 。铜镍钢气焊及碳弧焊用  ，也可钎焊铜、钢、不銹钢材质的RBCuZn-CS 222FCu58Sn0.9Si0.1Fe0.8 Zn Rem.S222 welding rod coated with flux.外涂焊剂的S222焊条RBCuZn-CS 223Cu59 Sn0.6Zn Rem.Melting point is about 900℃. Braze welding of copper, steel and cast iron.溶点约900℃ 。铜、钢、不銹钢材质的钎焊用RBCuZn-AS 224Cu62 Si0.5Zn Rem.Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.溶点约905℃ 。铜镍钢气焊及碳弧焊用  ，也可钎焊铜、钢、不銹钢材质的Copperalloys铜和金S 225Cu48 Ni10Zn Rem.Melting point is about 935℃and high strength. Braze welding of steel, nickel and carbide alloys.溶点约935℃ 。高比程度,钎焊钢、镍及聚氯乙烯塑料和金用RBCuZn-DS 225FCu48 Ni10Zn Rem.S225 welding rod coated with flux.外涂焊剂的S225焊条RBCuZn-DS 226Cu60 Sn0.3Si0.2 Zn Rem.Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron.溶点约900℃ 。铜镍钢气焊用  ，也可钎焊铜、钢、不銹钢材质的S 227Cu58Sn0.9Ni0.5Si0.1 Fe0.8Zn Rem.Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.溶点880℃ 。铜镍钢气焊及碳弧焊用  ，也可钎焊铜、钢、不銹钢材质的RBCuZn-BS 229Cu55 Ni6 Mn4Zn余Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide.溶点约920℃ 。高比程度,钎焊钢、镍及聚氯乙烯塑料和金用Aluminum alloys铝和金S 301Al≥99.5Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum.弹延展性好、耐蚀 。纯铝气焊、氩弧焊用ER1100S 311Si5 Al Rem.Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys.抗裂性好  ，互通性大 。铝和金气焊、氩弧焊用 。不容易用高镁和金ER4043S 321Mn1.3 Al Rem.Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys.正常的耐蚀性、可焊性及弹延展性 。铝和金气焊、氩弧焊用S 331Mg5 Mn0.4Al Rem.Corrosion resistance and high strength. Argon arc welding of aluminum alloys.耐蚀  ，比程度高 。铝和金氩弧焊用ER5183斯米克钎焊料不同有：（铜锌钎焊料）  ，（铜磷银基钎焊料）  ，（铝基钎焊料）  ，（锡铅钎焊料）  ，（镍基钎焊料).详细介绍以下：Category类型Trade-mark钢号Specification型号MeltingPoint溶点(℃)Chemicalcomposition核心营养成分(%)Application作用Equivalentto AWS很多的AWSCopperzinc铜锌L103Wire & rod丝885-888Cu54 Zn Rem.Brazing of copper, bronze and steel, subjected to low load.钎焊铜、铜镍钢和钢等承载力不算太大轴类所要要的零部件L104Foil箔890-930Cu57 Mn2Co2 Zn Rem.Brazing of carbide cutting tool.钎焊聚氯乙烯塑料和金车床刀具Copperphosphorus铜磷L201Cast rod, wire & rod, powder铸条、丝、粉710-800P7 Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜和金BCuP-2L204Cast rod, wire铸条、丝640-815P5 Ag15Cu Rem.Brazing of copper, copper alloys, silver and molybdenum etc.钎焊铜及铜和金、银、钼等材料材质 。BCuP-5L205Cast rod, wire & rod, powder铸条、丝、箔640-800P6 Ag5Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜和金BCuP-3L207Cast rod, wire & rod铸条、丝640-770P7 Ag5Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜和金BCuP-7L209Cast rod, wire铸条、丝684-710P7 Ag2Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜和金 。BCuP-6　Silverbase银基L302Wire & rod丝745-775Ag25 Cu40Zn Rem.Brazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜和金、钢及不銹钢材质的等L303Wire & rod丝660-725Ag45 Cu30Zn余Brazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜和金、钢及不銹钢材质的等BAg-5L303FFlux coated rod涂药丝660-725Ag45 Cu30Zn Rem.L303 coated with flux, the same application as L303.外涂钎剂的L303  ，作用与L303同BAg-5L304Foil箔690-775Ag50 Cu34Zn Rem.Brazing of copper, copper alloys and steel etc.钎焊铜及铜和金、钢等BAg-6L308Wire & rod丝779-780Ag72 Cu Rem.Brazing of copper and nickel under vacuum or reducing protective atmosphere.铜和镍的重力作用室或复原守护的氛围钎焊BAg-8L312Wire & rod丝595-605Ag40.Cu.Zn.CdBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜和金、钢及不銹钢材质的等L313Wire & rod丝625-635Ag50.Cu.Zn.CdBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜和金、钢及不銹钢材质的等BAg-1aL321Wire & rod丝615-650Ag56.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜和金、钢及不銹钢材质的等BAg-7L323Wire & rod丝665-755Ag30.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜和金、钢及不銹钢材质的等L325Wire & rod丝645-685Ag45.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜和金、钢及不銹钢材质的等BAg-36L326Wire & rod丝650-720Ag38.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜和金、钢及不銹钢材质的等BAg-34Aluminum base铝基L400Cast rod, wire & rod铸条、丝577-582Si11.5Al Rem.Brazing of aluminum and aluminum alloys.铝及铝和金的钎焊BAlSi-4L401Cast rod铸条525-535Si5 Cu28Al Rem.Brazing of aluminum and aluminum alloys.铝及铝和金的钎焊Tin lead锡铅L600Wire & rod丝183-185Sn60 Sb≤0.8Pb Rem.Soldering of fusible metals and heat-treated part.易熔材料材质及热整理件的钎焊60SnL601Wire & rod丝183-227Sn18 Sb2Pb Rem.Soldering of copper, copper alloys and galvanized iron plain sheet.铜及铜和金、热镀锌板镀锌板铁的钎焊 。18SnL602Wire & rod丝183-256Sn30 Sb2Pb Rem.Soldering of copper, brass, copper alloys and galvanized iron plain sheet.铜、铜镍钢、铁、热镀锌板镀锌板铁的钎焊30SnL603Wire & rod丝183-235Sn40 Sb2Pb Rem.Soldering of copper, copper alloys, steel and zinc parts.铜及铜和金、钢、锌制所要要的零部件的钎焊40SnL604Wire & rod丝183-222Sn90 Sb≤0.15Pb Rem.Soldering of copper and steel for food and medicine field.保健食品厂、医疗管理所要铜、钢等材料材质的钎焊90SnL605Wire & rod丝232-240Ag5 Sn95Soldering of copper and steel for electrical and food field.电器产品、保健食品厂所要铜、钢等材料材质的钎焊L608Wire & rod丝295-305Sn5.5 Ag2.5Pb Rem.Soldering of copper, copper alloys, steel and stainless steel.铜及铜和金、钢及不銹钢材质的的钎焊Nickel base镍基L702Powder粉970-1000Cr7 B3 Si4Ni Rem.Brazing of stainless steel under vacuum or protective atmosphere.不銹钢材质的重力作用室或守护的氛围钎焊BNi-2Category类型Trade-mark钢号Product name名称大全Characteristics & application特征参数和作用Gaswelding气焊CJ301Copper gas welding flux铜气焊熔剂Melting point is about 650℃, flux for gas welding and brazing of copper and copper alloys.溶点约650℃  ，铜及铜和金气焊或钎焊的助熔剂CJ401Aluminum gas welding flux铝气焊熔剂Melting point is about 560℃, flux for gas welding of aluminum and aluminum alloys.溶点约560℃  ，铝及铝和金气焊的助熔剂Silverbrazing银钎焊QJ101Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃.在550-750℃依据钎焊铜及铜和金、钢及不銹钢材质的的助熔剂QJ102Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃.在600-850℃依据钎焊铜及铜和金、钢及不銹钢材质的的助熔剂QJ102ASilver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃. Non agglomeration.在600-850℃依据钎焊铜及铜和金、钢及不銹钢材质的 。后易凝固QJ112Silver brazing paste flux膏状银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃.在600-850℃依据钎焊铜及铜和金、钢及不銹钢材质的的助熔剂QJ103Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃.在550-750℃依据钎焊铜及铜和金、钢及不銹钢材质的的助熔剂Aluminum brazing铝钎焊QJ201Aluminum brazing flux铝钎焊熔剂Brazing flux of aluminum and aluminum alloys within 450-620℃.在450-620℃依据钎焊铝及铝和金的助熔剂QJ207Aluminum brazing flux铝钎焊熔剂Brazing flux of aluminum and aluminum alloys within 560-620℃.在560-620℃依据钎焊铝及铝和金的助熔剂Category类型Trade-mark钢号Chemicalcomposition化学上的营养成分(%)Hardness密度Application作用　Oxy-AcetyleneFlamespray-using氧乙炔焰喷焊F103Cr10 B1.5 Si3 Ni Rem.HRc 25Spray-fusing of cast iron parts,,, such as die for glass, cylinder, and guide.不銹钢材质的件的喷焊  ，如窗户玻璃黑色防静电镊子  ，汽缸、导轨F101Cr10 B2.5 Si3 Ni Rem.HRc 45Spray-fusing of parts resistance to wear and corrosion, such as valve, the rotator and piston of pump.耐腐、耐蚀件的喷焊  ，如蝶阀、泵电机定转子、泵注塞泵F101FeCr10 B2.5 Si3 Fe10Ni Rem.HRc 45Spray-fusing of corrosion-resistant parts, such as axle and stigma.耐腐件的喷焊  ，如轴类、汽门F102Cr16 B4 Si4 Ni Rem.HRc 60Spray-fusing of parts resistance to wear, corrosion and high temperature oxidation, such as die and piston.耐腐、耐蚀、抗较炎热度阳极腐蚀轴类所要要的零部件的喷焊  ，如黑色防静电镊子、注塞泵F102FeCr16 B4 Si4 Fe15Ni Rem.HRc 60Spray-fusing of corrosion-resistant parts, such as axle and cold die.耐腐件的喷焊  ，如轴类、冷黑色防静电镊子F105F102+50%WCHRc 60Spray-fusing of parts resistance to grain-wear , such as guide plate, scraper and blade of fan.抗金刚石微粉损耗场所  ，的喷焊  ，如导板、刮粪、轴流真空送风机叶轮叶子F105FeF102Fe+35%WCHRc 60Spray-fusing of parts resistance to grain-wear, such as guide plate, scraper and blade of fan.抗金刚石微粉损耗场所  ，的喷焊  ，如导板、刮粪、轴流真空送风机叶轮叶子F108F102+80%WCHRc 60Spray-fusing of parts resistance to strong grain-wear and free machining, such as harrow teeth of dredger.抗高金刚石微粉损耗  ，需不需要制造场所  ，的喷焊  ，如挖泥船耙齿F301Cr5 B4 Si4 Ni30Fe Rem.HRc 45Spray-fusing of vulnerable parts of agricultural machinery and mining machinery, such as gear and axletree.农机具,矿厂机械设备制造装备制造易损件的喷焊  ，如齿轴  ，车轴Track iron powder轨铁粉Cr5 B1.5 Si3 Ni30Fe Rem.HRc 28Repair spray-fusing of defects such as scratch and concavity of railroad track.电气化铁路道轨磕伤、低塌等疵点的复原喷焊Oxy-acetylene flame spraying氧乙炔焰静电喷砂工艺F111Cr5 B1.5 Si3 Ni30Fe Rem.HB 150Spraying of bearing and cutting parts etc.的的轮毂轴承、钻削件等的静电喷砂工艺F113Cr10 B1.5 Si3 Ni Rem.HB 250Spray-fusing or spraying, such as roll, piston and axle of wear and corrosion resistance.静电喷砂工艺若为喷焊  ，如滚轴、注塞泵、耐蚀耐腐轴等F313Cr15 B1.5 Fe Rem.HB 250Spraying of dryer of papermaking and axle.造纸技术烘缸、轴类的静电喷砂工艺F314Cr18 Ni9 B1.5 Fe Rem.HB 250Spraying of axle.轴类静电喷砂工艺F412Sn10 P0.3 Cu Rem.HB 80Spraying of axle and bearing.轴、的的轮毂轴承的静电喷砂工艺F512符合Al5Ni95Backing spray of transition layer between base and working layer.静电喷砂工艺层的基体与办公层区间内作为衔接（打底衣）层用静电喷砂工艺PTAhardfacing等铝亚铁阴铁阴离子弧喷焊F221Cr26 W5 B0.7 Co Rem.HRc 43PTA hardfacing of sealing surface of high temperature and high pressure valve and the edge of hot shearing tool.较炎热度髙压蝶阀封口面、热截取刃口的等铝亚铁阴铁阴离子喷焊F223Cr21 W5 B1.5 Co Rem.HRc 40PTA hardfacing of parts resistance to wear and corrosion at high temperature, such as valve under high temperature and high pressure, and blower.较炎热度下耐腐耐蚀件的喷焊  ，如较炎热度髙压蝶阀、鼓轴流真空送风机F321Cr13 B1.5 Si1 Fe Rem.HRc 45PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as stop-plate etc.中温中压蝶阀的闸板以及他耐腐件的等铝亚铁阴铁阴离子喷焊F322Cr23 Ni13 Si5 B1Fe Rem.HRc 40PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as valve base etc.中温中压蝶阀的阀球以及他耐腐件的等铝亚铁阴铁阴离子喷焊F422Sn10 P0.3 Cu Rem.HB 80PTA hardfacing of axle and bearing etc.轴、的的轮毂轴承等铝亚铁阴铁阴离子喷焊