Category分类Trade-Mark型号Equivalent to China Standard差不多执行标准Characteristics & application特质和应用场景Equivalent to AWS差不多AWSHard-surfacing硬面堆焊D 667EDZCr-B-15HRc≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.HRc≥48  ，防灼伤、耐气蚀、抗空气被氧化物 。堆焊回转窑料钟、切割零部件D 802EDCoCr-A-03HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter.HRc38-47  ，耐熱、耐蚀、防灼伤 。堆焊温度过高髙压零部件如热切剪刀身ECoCr-AD 812EDCoCr-B-03HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve.HRc45-50  ，耐熱、耐蚀、防灼伤 。堆焊温度过高髙压零部件如内然机阀ECoCr-BD 822HRc≥53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler.HRc≥53  ，耐熱、防灼伤  ，但抗冲撞特点差 。堆焊bwin·必赢(中国)唯一官方网站压缩机飞速转动离心叶轮D 832EDCoCr-C-03HRc≥50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way.HRc≥50  ，耐熱、防灼伤 。堆焊温度过高髙压零部件如带钢导轨ECoCr-CD 842EDCoCr-D-03HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die.HRc28-38  ，耐蚀、抗热抗压硬性  ，体现了生产硬性性 。堆焊热锻模Cast iron球墨碳钢Z 308EZNiPure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool.纯镍  ，综和特点好 。球墨碳钢薄件及生产面补焊用  ，如数控车床导卫ENi-ClZ 408EZNiFeIron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.镍铁  ，抗压硬性高、延性好 。重要性灰球墨碳钢及球铁焊补用  ，如汽缸体ENiFe-ClZ 508EZNiCu-1Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.镍铜  ，易生产  ，但抗裂性较低 。不弯矩的灰球墨碳钢生产面及砂眼补焊ENiCu-BCopper alloys铜碳素钢材料Cu 107ECuRed copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.裸裸裸紫铜  ，耐细颗粒物  ，沽岛的海灼伤  ，导电性好 。裸裸裸紫铜激光补焊用  ，如导电铜排ECuCu 207ECuSiSilicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.硅尊盘器  ，耐蚀、抗压硬性高 。铜、硅尊盘器及裸紫铜激光补焊用ECuSiCu 227ECuSnBTin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.锡磷尊盘器  ，耐蚀、抗压硬性高 。铜、硅尊盘器及裸紫铜激光补焊用ECuSn-CCu 237ECuAlAluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.铝尊盘器  ，防灼伤、耐蚀  ，抗压硬性高 。铜碳素钢材料激光补焊或堆焊用ECuAl-A2Aluminum alloys铝碳素钢材料Al 109TAlPure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.纯铝  ，耐蚀性好  ，但抗压硬性不太高  ，纯铝激光补焊用E1100Al 209TAlSiSilicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.铝硅  ，抗裂性好  ，常用性大 。铝碳素钢材料激光补焊用  ，不要激光补焊铝镁碳素钢材料E4043Al 309TAMnManganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.铝锰  ，抗压硬性高  ，耐蚀 。铝碳素钢材料激光补焊用E3003Nickel alloys镍碳素钢材料Ni 102ENi-1Pure nickel. Welding and surfacing of nickel and nickel to steel.纯镍  ，用在镍、镍与钢的激光补焊与堆焊ENi-1Ni 207ENiCu-7Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.镍铜  ，用在镍铜、镍铜与钢的激光补焊与堆焊ENiCu-7Category分类Trademark型号Chemical composition核心电化学成分的材料(%)Characteristics & application特质和应用场景Equivalent to AWS差不多AWSHardfacing硬面堆焊S 101C3 Cr28 Ni4Si3.5 Fe Rem.HRc48-54. Resistance to wear, gas corrosion and oxidation. Hardfacing of bucket tooth and case pump.HRc48-54  ，防灼伤、耐气蚀、抗空气被氧化物 。堆焊铲斗齿  ，泵套S 111C1 Cr29 W5Co Rem.HRc38-47. Resistance to wear and corrosion at high-temperature. Hardfacing of high temperature and pressure valve.HRc38-47  ，温度过高髙压下防灼伤、耐蚀 。堆焊温度过高髙压髙压调节阀 ECoCr-AS 112C1.5 Cr29 W8Co Rem.HRc45-50. Resistance to wear and corrosion at high-temperature. Hardfacing of valve and hot-rolling pass.HRc45-50  ，温度过高髙压下防灼伤、耐蚀 。堆焊调节阀  ，带钢孔型ECoCr-BS 113C2.5 Cr30 W17Co Rem.HRc≥55. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of screw charging carriage.HRc≥55  ，温度过高髙压下防灼伤、耐熱  ，但抗冲撞特点差 。堆焊锥型放卷机用S 114C2.5 Cr30 W12Co Rem.HRc≥53. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of three-cone bit.HRc≥53  ，温度过高髙压下防灼伤、耐熱  ，但抗冲撞较低 。堆焊牙轮麻花钻ECoCr-CCopperalloys铜碳素钢材料S 201Sn1 Si0.3Mn0.3Cu Rem.Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper.自动化机器特点好  ，抗裂性好 。裸裸裸紫铜气焊及氩弧焊用ERCuS 211Si3 Mn1Cu Rem.Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel.自动化机器特点好  ，铜碳素钢材料氩弧焊及钢的MIG钎焊用ERCuSi-AlS 212Sn5 Cu Rem.Wear resistance. Argon arc welding of copper alloys and surfacing of steel.防灼伤性好 。铜碳素钢材料氩弧焊及钢的堆焊用ERCuSn-AS 213Sn8 Cu Rem.Wear resistance. Argon arc welding of copper alloys and surfacing of steel.防灼伤性好 。铜碳素钢材料氩弧焊及钢的堆焊用ERCuSn-CS 214Al7.5 Cu Rem.Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.防灼伤、耐蚀 。铜碳素钢材料氩弧焊及钢的堆焊用ERCuAl-A1S 215Al9 Cu Rem.Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.防灼伤、耐蚀 。铜碳素钢材料氩弧焊及钢的堆焊用ERCuAl-A2S 221Cu60 Sn1 Si0.3Zn Rem.Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.溶点约890℃ 。裸紫铜气焊及碳弧焊用  ，也可钎焊铜、钢、球墨碳钢S 221FCu60 Sn1 Si 0.3Zn Rem.S221 welding rod coated with flux.外涂焊剂的S221焊条S 222Cu58Sn0.9Si0.1Fe0.8 Zn Rem.Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.溶点约880℃ 。裸紫铜气焊及碳弧焊用  ，也可钎焊铜、钢、球墨碳钢RBCuZn-CS 222FCu58Sn0.9Si0.1Fe0.8 Zn Rem.S222 welding rod coated with flux.外涂焊剂的S222焊条RBCuZn-CS 223Cu59 Sn0.6Zn Rem.Melting point is about 900℃. Braze welding of copper, steel and cast iron.溶点约900℃ 。铜、钢、球墨碳钢钎焊用RBCuZn-AS 224Cu62 Si0.5Zn Rem.Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.溶点约905℃ 。裸紫铜气焊及碳弧焊用  ，也可钎焊铜、钢、球墨碳钢Copperalloys铜碳素钢材料S 225Cu48 Ni10Zn Rem.Melting point is about 935℃and high strength. Braze welding of steel, nickel and carbide alloys.溶点约935℃ 。高抗压硬性,钎焊钢、镍及孔状碳素钢材料用RBCuZn-DS 225FCu48 Ni10Zn Rem.S225 welding rod coated with flux.外涂焊剂的S225焊条RBCuZn-DS 226Cu60 Sn0.3Si0.2 Zn Rem.Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron.溶点约900℃ 。裸紫铜气焊用  ，也可钎焊铜、钢、球墨碳钢S 227Cu58Sn0.9Ni0.5Si0.1 Fe0.8Zn Rem.Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.溶点880℃ 。裸紫铜气焊及碳弧焊用  ，也可钎焊铜、钢、球墨碳钢RBCuZn-BS 229Cu55 Ni6 Mn4Zn余Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide.溶点约920℃ 。高抗压硬性,钎焊钢、镍及孔状碳素钢材料用Aluminum alloys铝碳素钢材料S 301Al≥99.5Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum.延性好、耐蚀 。纯铝气焊、氩弧焊用ER1100S 311Si5 Al Rem.Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys.抗裂性好  ，常用性大 。铝碳素钢材料气焊、氩弧焊用 。不要用高镁碳素钢材料ER4043S 321Mn1.3 Al Rem.Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys.更好的耐蚀性、可焊性及延性 。铝碳素钢材料气焊、氩弧焊用S 331Mg5 Mn0.4Al Rem.Corrosion resistance and high strength. Argon arc welding of aluminum alloys.耐蚀  ，抗压硬性高 。铝碳素钢材料氩弧焊用ER5183斯米克钎焊料依次有：（铜锌钎焊料）  ，（铜磷银基钎焊料）  ，（铝基钎焊料）  ，（锡铅钎焊料）  ，（镍基钎焊料).筒介以下：Category分类Trade-mark型号Specification尺寸规格MeltingPoint溶点(℃)Chemicalcomposition核心电化学成分的材料(%)Application应用场景Equivalentto AWS差不多AWSCopperzinc铜锌L103Wire & rod丝885-888Cu54 Zn Rem.Brazing of copper, bronze and steel, subjected to low load.钎焊铜、尊盘器和钢等弯矩不零部件L104Foil箔890-930Cu57 Mn2Co2 Zn Rem.Brazing of carbide cutting tool.钎焊孔状碳素钢材料车床刀具Copperphosphorus铜磷L201Cast rod, wire & rod, powder铸条、丝、粉710-800P7 Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜碳素钢材料BCuP-2L204Cast rod, wire铸条、丝640-815P5 Ag15Cu Rem.Brazing of copper, copper alloys, silver and molybdenum etc.钎焊铜及铜碳素钢材料、银、钼等废重和金属 。BCuP-5L205Cast rod, wire & rod, powder铸条、丝、箔640-800P6 Ag5Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜碳素钢材料BCuP-3L207Cast rod, wire & rod铸条、丝640-770P7 Ag5Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜碳素钢材料BCuP-7L209Cast rod, wire铸条、丝684-710P7 Ag2Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜碳素钢材料 。BCuP-6　Silverbase银基L302Wire & rod丝745-775Ag25 Cu40Zn Rem.Brazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜碳素钢材料、钢及不透钢304等L303Wire & rod丝660-725Ag45 Cu30Zn余Brazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜碳素钢材料、钢及不透钢304等BAg-5L303FFlux coated rod涂药丝660-725Ag45 Cu30Zn Rem.L303 coated with flux, the same application as L303.外涂钎剂的L303  ，应用场景与L303同一BAg-5L304Foil箔690-775Ag50 Cu34Zn Rem.Brazing of copper, copper alloys and steel etc.钎焊铜及铜碳素钢材料、钢等BAg-6L308Wire & rod丝779-780Ag72 Cu Rem.Brazing of copper and nickel under vacuum or reducing protective atmosphere.铜和镍的重力作用泵或替换保护的英文气体钎焊BAg-8L312Wire & rod丝595-605Ag40.Cu.Zn.CdBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜碳素钢材料、钢及不透钢304等L313Wire & rod丝625-635Ag50.Cu.Zn.CdBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜碳素钢材料、钢及不透钢304等BAg-1aL321Wire & rod丝615-650Ag56.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜碳素钢材料、钢及不透钢304等BAg-7L323Wire & rod丝665-755Ag30.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜碳素钢材料、钢及不透钢304等L325Wire & rod丝645-685Ag45.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜碳素钢材料、钢及不透钢304等BAg-36L326Wire & rod丝650-720Ag38.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜碳素钢材料、钢及不透钢304等BAg-34Aluminum base铝基L400Cast rod, wire & rod铸条、丝577-582Si11.5Al Rem.Brazing of aluminum and aluminum alloys.铝及铝碳素钢材料的钎焊BAlSi-4L401Cast rod铸条525-535Si5 Cu28Al Rem.Brazing of aluminum and aluminum alloys.铝及铝碳素钢材料的钎焊Tin lead锡铅L600Wire & rod丝183-185Sn60 Sb≤0.8Pb Rem.Soldering of fusible metals and heat-treated part.易熔废重和金属及热加铝件的钎焊60SnL601Wire & rod丝183-227Sn18 Sb2Pb Rem.Soldering of copper, copper alloys and galvanized iron plain sheet.铜及铜碳素钢材料、热渡铁白白铁的钎焊 。18SnL602Wire & rod丝183-256Sn30 Sb2Pb Rem.Soldering of copper, brass, copper alloys and galvanized iron plain sheet.铜、裸紫铜、铁、热渡铁白白铁的钎焊30SnL603Wire & rod丝183-235Sn40 Sb2Pb Rem.Soldering of copper, copper alloys, steel and zinc parts.铜及铜碳素钢材料、钢、锌制零部件的钎焊40SnL604Wire & rod丝183-222Sn90 Sb≤0.15Pb Rem.Soldering of copper and steel for food and medicine field.调味品、整形所要铜、钢等废重和金属的钎焊90SnL605Wire & rod丝232-240Ag5 Sn95Soldering of copper and steel for electrical and food field.电器电线电缆、调味品所要铜、钢等废重和金属的钎焊L608Wire & rod丝295-305Sn5.5 Ag2.5Pb Rem.Soldering of copper, copper alloys, steel and stainless steel.铜及铜碳素钢材料、钢及不透钢304的钎焊Nickel base镍基L702Powder粉970-1000Cr7 B3 Si4Ni Rem.Brazing of stainless steel under vacuum or protective atmosphere.不透钢304重力作用泵或保护的英文气体钎焊BNi-2Category分类Trade-mark型号Product name简称Characteristics & application特质和应用场景Gaswelding气焊CJ301Copper gas welding flux铜气焊熔剂Melting point is about 650℃, flux for gas welding and brazing of copper and copper alloys.溶点约650℃  ，铜及铜碳素钢材料气焊或钎焊的助熔剂CJ401Aluminum gas welding flux铝气焊熔剂Melting point is about 560℃, flux for gas welding of aluminum and aluminum alloys.溶点约560℃  ，铝及铝碳素钢材料气焊的助熔剂Silverbrazing银钎焊QJ101Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃.在550-750℃条件钎焊铜及铜碳素钢材料、钢及不透钢304的助熔剂QJ102Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃.在600-850℃条件钎焊铜及铜碳素钢材料、钢及不透钢304的助熔剂QJ102ASilver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃. Non agglomeration.在600-850℃条件钎焊铜及铜碳素钢材料、钢及不透钢304 。不容易成坨QJ112Silver brazing paste flux膏状银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃.在600-850℃条件钎焊铜及铜碳素钢材料、钢及不透钢304的助熔剂QJ103Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃.在550-750℃条件钎焊铜及铜碳素钢材料、钢及不透钢304的助熔剂Aluminum brazing铝钎焊QJ201Aluminum brazing flux铝钎焊熔剂Brazing flux of aluminum and aluminum alloys within 450-620℃.在450-620℃条件钎焊铝及铝碳素钢材料的助熔剂QJ207Aluminum brazing flux铝钎焊熔剂Brazing flux of aluminum and aluminum alloys within 560-620℃.在560-620℃条件钎焊铝及铝碳素钢材料的助熔剂Category分类Trade-mark型号Chemicalcomposition电化学电化学成分的材料(%)Hardness硬性Application应用场景　Oxy-AcetyleneFlamespray-using氧乙炔焰喷焊F103Cr10 B1.5 Si3 Ni Rem.HRc 25Spray-fusing of cast iron parts,,, such as die for glass, cylinder, and guide.球墨碳钢件的喷焊  ，如玻离模貝  ，汽缸、导轨F101Cr10 B2.5 Si3 Ni Rem.HRc 45Spray-fusing of parts resistance to wear and corrosion, such as valve, the rotator and piston of pump.防灼伤、耐蚀件的喷焊  ，如调节阀 、泵马达转子、泵轴向齿轴泵泵F101FeCr10 B2.5 Si3 Fe10Ni Rem.HRc 45Spray-fusing of corrosion-resistant parts, such as axle and stigma.防灼伤件的喷焊  ，如轴类、汽门F102Cr16 B4 Si4 Ni Rem.HRc 60Spray-fusing of parts resistance to wear, corrosion and high temperature oxidation, such as die and piston.防灼伤、耐蚀、抗温度过高髙压空气被氧化物零部件的喷焊  ，如模貝、轴向齿轴泵泵F102FeCr16 B4 Si4 Fe15Ni Rem.HRc 60Spray-fusing of corrosion-resistant parts, such as axle and cold die.防灼伤件的喷焊  ，如轴类、冷模貝F105F102+50%WCHRc 60Spray-fusing of parts resistance to grain-wear , such as guide plate, scraper and blade of fan.抗磨砂颗粒损坏地方的喷焊  ，如导板、刮刀、压缩机叶面F105FeF102Fe+35%WCHRc 60Spray-fusing of parts resistance to grain-wear, such as guide plate, scraper and blade of fan.抗磨砂颗粒损坏地方的喷焊  ，如导板、刮刀、压缩机叶面F108F102+80%WCHRc 60Spray-fusing of parts resistance to strong grain-wear and free machining, such as harrow teeth of dredger.抗强列磨砂颗粒损坏  ，不需生产地方的喷焊  ，如挖泥船耙齿F301Cr5 B4 Si4 Ni30Fe Rem.HRc 45Spray-fusing of vulnerable parts of agricultural machinery and mining machinery, such as gear and axletree.农资,露天煤矿自动化机器易损件的喷焊  ，如齿轴  ，车轴Track iron powder轨铁粉Cr5 B1.5 Si3 Ni30Fe Rem.HRc 28Repair spray-fusing of defects such as scratch and concavity of railroad track.企业公司铁路钢轨擦破、低塌等不足的复原喷焊Oxy-acetylene flame spraying氧乙炔焰粉末喷塑F111Cr5 B1.5 Si3 Ni30Fe Rem.HB 150Spraying of bearing and cutting parts etc.滑动滑动轮毂轴承、钻削件等的粉末喷塑F113Cr10 B1.5 Si3 Ni Rem.HB 250Spray-fusing or spraying, such as roll, piston and axle of wear and corrosion resistance.粉末喷塑也能够喷焊  ，如滚桶、轴向齿轴泵泵、耐蚀防灼伤轴等F313Cr15 B1.5 Fe Rem.HB 250Spraying of dryer of papermaking and axle.制纸烘缸、轴类的粉末喷塑F314Cr18 Ni9 B1.5 Fe Rem.HB 250Spraying of axle.轴类粉末喷塑F412Sn10 P0.3 Cu Rem.HB 80Spraying of axle and bearing.轴、滑动滑动轮毂轴承的粉末喷塑F512复合材料Al5Ni95Backing spray of transition layer between base and working layer.粉末喷塑层的基体与运作层间衔接（打底妆）层用粉末喷塑PTAhardfacing等铝铁铁阴阳正离子弧喷焊F221Cr26 W5 B0.7 Co Rem.HRc 43PTA hardfacing of sealing surface of high temperature and high pressure valve and the edge of hot shearing tool.温度过高髙压髙压调节阀 密封盖面、热切剪刃口的等铝铁铁阴阳正离子喷焊F223Cr21 W5 B1.5 Co Rem.HRc 40PTA hardfacing of parts resistance to wear and corrosion at high temperature, such as valve under high temperature and high pressure, and blower.温度过高髙压下防灼伤耐蚀件的喷焊  ，如温度过高髙压髙压调节阀 、鼓压缩机F321Cr13 B1.5 Si1 Fe Rem.HRc 45PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as stop-plate etc.中温中压调节阀 的闸板和他防灼伤件的等铝铁铁阴阳正离子喷焊F322Cr23 Ni13 Si5 B1Fe Rem.HRc 40PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as valve base etc.中温中压调节阀 的高压闸阀和他防灼伤件的等铝铁铁阴阳正离子喷焊F422Sn10 P0.3 Cu Rem.HB 80PTA hardfacing of axle and bearing etc.轴、滑动滑动轮毂轴承等铝铁铁阴阳正离子喷焊